TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 119 of 734

TM 5-5420-202-20-2

TRANSMISSION OIL COOLER REPLACEMENT (Sheet 9 of 10)

15.

16.

17.

Remove drip pan or rags from under cooler

connectors.

Remove plastic barrier material and masking

tape from ends of tube (M) and transmission

adapter (N).

Using 1-1/2 inch wrench, install tube (M)

to transmission adapter (N).

18.

Remove plastic barrier material and masking tape from ends of tube (P) and transmission

adapter (Q).

19.

Using 1-1/2 inch wrench, install tube (P)

to transmission adapter (Q).

Go on to Sheet 10

20.

Using rags, wipe up oil which may

have dripped or leaked during oil

cooler replacement.

21.

Remove cover from turbosupercharger

air inlet port.

22.

Position clamp (R) and air inlet hose (S)

onto elbow (T).

23.

Using screwdriver, tighten clamp (R).

6-46