TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 127 of 734

TM 5-5420-202-20-2

TRANSMISSION OIL COOLER SCREEN REPLACEMENT (Sheet 2 of 2)

INSTALLATION:

NOTE

For 2A engine screen, do step 1,

2, 10, and 11.

1.

Position oil cooler screen (A) into place

on oil cooler.

2.

For 2D engine, install screw (B) and

washer (C). For 2A engine, use socket to install

and tighten four screws (B) and washers (C).

3.

4.

5.

6.

7.

8.

9.

10.

11.

NOTE

You will have bracket (F) and tube

(G) only if your vehicle is equipped

with a 2DA engine.

Position bracket (F) to oil cooler.

Install assembled washer screw (H).

Using socket, tighten screws (B) and (H).

Using 3/4 inch wrench, install bolt (J).

Using socket and 1/2

inch wrench, install screw (K) and nut (L)

to secure clamp (M) and tube (G) to

bracket (F).

Install powerplant (page 5-14).

Install both air cleaner outlet hose

assemblies (page 7-86).

Position harness and bracket (D) into

place on oil cooler.

Using socket, extension, and ratchet

through harness and into bracket,

install two assembled washer screws

(E).

End of Task

6-54

Change 1