TM-5-5420-202-20-2
M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4
OCTOBER 1985
TM-5-5420-202-20-2 - Page 136 of 734
TM 5-5420-202-20-2
OIL COOLER VENT HOSES AND FITTINGS REPALCEMENT (Sheet 3 of 3)
INSPECTION:
1.
Check two hoses (B) for frayed covering and damaged threads. Replace damaged hoses.
2.
Check fittings for cracks and thread damage. Replace damaged fittings.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
End
INSTALLATION:
Install new packing into two adapters (A).
Using 11/16 inch wrench, install two adapters (A) into oil coolers.
Using 9/16 inch wrench, install adapter (E).
Using 9/16 inch wrench, install two hose
Holding tee tube (C) with 7/16 inch open
two hose assemblies (B) to tee tube (C).
assemblies (B) to two adapters (A).
end wrench and using 9/16 inch wrench, install
Using 9/16 inch wrench, install hose assembly (D) to tee tube (C).
Using 9/16 inch wrench, install hose assembly (D) to adapter (E).
Using hands, install four clamps on hose assemblies (B).
Using socket, install four screws (F) holding loop clamps.
Install powerplant (page 5-14).
of Task
6-63
Back to Top
