TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 144 of 734

TM 5-5420-202 -20-2

LEFT OUTER AND INNER ENGINE-TO-TRANSMISSION OIL LINE TUBE ASSEMBLIES

REPLACEMENT (Sheet 4 of 4)

11.

12.

13.

14.

15.

16.

17.

18.

Remove rags or drip pan placed under transmission connector (J and R) and oil cooler

connectors (H and Q).

Replenish oil lost during oil line tube assembly’s removal (LO 5-5420-202-12).

Connect powerplant for powerplant ground hop (page 5-25).

Start and run engine.

Check for oil leaks at oil cooler and transmission oil line tube assembly

connections.

Shut down engine.

Disconnect powerplant from ground hop (page 5-40).

Install engine shroud (page 9-31).

Install rear engine shroud support (page 9-40).

Install powerplant (page 5-14).

End of Task

6-71