TM-5-5420-202-20-2
M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4
OCTOBER 1985
TM-5-5420-202-20-2 - Page 140 of 734
TM 5-5420-202 -20-2
RIGHT OUTER AND INNER ENGINE TO TRANSMISSION OIL LINE TUBE ASSEMBLIES
REPLACEMENT (Sheet 4 of 4)
11.
12.
13.
14.
15.
16.
17.
18.
Remove rags or drip pan placed under transmission connectors (N and D) and oil cooler
connectors (H and Q).
Replenish oil lost during oil line tube assembly’s removal. (LO 5-5420-202-12).
Connect powerplant for powerplant ground hop (page 5-25).
Start and run engine.
Check for oil leaks at oil cooler and transmission oil line tube
assembly connections.
Shut down engine.
Disconnect powerplant from ground hop (page 5-40).
Install engine shroud (page 9-31).
Install rear engine shroud support (page 9-40).
Install powerplant (page 5-14).
End of Task
6-67
Back to Top
