TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 135 of 734

TM 5-5420-202 -20-2

OIL COOLER VENT HOSES AND FITTINGS REPLACEMENT (Sheet 2 of 3)

1.

2.

3.

4.

5.

6.

7.

8.

Using socket, remove four screws (A) holding loop clamps. Remove clamps.

Using 9/16 inch wrench, remove hose assembly (B) from adapter (C).

Using 9/16 inch wrench, remove hose assembly (B) from tee tube (D).

Holding tee tube (D) with 7/16 inch wrench and using 9/16 inch wrench, remove two hose

assemblies (E) from tee tube (D).

Using 9/16 inch wrench, remove two hose assemblies (E) from two adapters (F).

Using 11/ 16 inch wrench, remove two adapters (F) from oil coolers.

Using 9/16 inch wrench, remove adapter (C).

Remove packing from two adapters (F). Discard packings.

Go on to Sheet 3

6-62