TM-5-5420-202-20-2
M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4
OCTOBER 1985
TM-5-5420-202-20-2 - Page 137 of 734
TM 5-5420-202-20-2
RIGHT OUTER AND INNER ENGINE TO TRANSMISSION OIL LINE TUBE ASSEMBLIES
REPLACEMENT (Sheet 1 of 4)
PROCEDURE INDEX
PROCEDURE
PAGE
Removal
6-64
Installation
6-66
TOOLS: 1-1/2 in. open end wrench
Torque wrench with 1/2 in. drive (0-175 lb-ft)
1-5/8 in. open end wrench
(0-237 NŽm)
1-5/8 in. socket with 3/4 in. drive
Adapter 1/2 in. to 3/4 in.
SPECIAL TOOLS: Ground hop kit (Item 31, Chapter 3, Section 1)
SUPPLIES:
Drip pan
Masking tape 1/2 in. (Item 58, Appendix D)
Plastic barrier material (Item 42, Appendix D)
Rags (Item 65, Appendix D)
Lubricating oil (Item 44, Appendix D)
Gaskets (4 required)
REFERENCE:
LO 5-5420-202-12
PRELIMINARY PROCEDURES:
Remove powerplant (page 5-2).
Remove engine shroud (page 9-30)
Remove rear engine shroud support (page 9-39)
Go on to Sheet 2
6-64
Change 3
Back to Top
