TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 153 of 734

TM 5-5420-202-20-2

ENGINE OIL FILTER ELEMENT REPLACEMENT (Sheet 5 of 5)

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

Install filter cover (D), making sure hole

(E) is at the top.

Using 9/16 inch socket, remove screws

from hole (F).

Place clamp (G) in position on filter cover

(D).

Using 9/16 inch socket, install ten self-

locking nuts and washers (H) to secure

cover. Do not overtighten as stripping may

result.

Using 3/4 inch wrench, tighten valve (J). Using torque wrench and 3/4 inch socket,

tighten valve (J) to 150-180 lb-in (17-29 NŽm).

Using 9/16 inch socket, install and tighten new washer and capscrew into hole (E).

Connect fire extinguisher line (page 5-21, step 55).

Start and run engine (TM 5-5420-202-10). Check for oil leaks.

Shut down engine.

Install upper engine access cover (page 17-12).

Replenish engine oil (LO 5-5420-202-12).

End of Task

6-80