TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 156 of 734

TM 5-5420-202-20-2

ENGINE OIL FILLER CAP REPLACEMENT (Sheet 3 of 3)

INSTALLATION:

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

Place new gasket (A) on cap assembly

(B).

Place two preformed packings (C) on

cap assembly (B).

Place cap assembly (B) in position on

engine access plate (D).

Using socket, install and tighten two screw

(E) and washers (F).

Place engine access plate (D) in position

on powerplant and push down until seated.

Using socket, install and tighten eight

screws and washers (G).

Place plate with electrical connectors

(H) in position.

Using socket, install and tighten four screws

and washers (J).

Open filler cap (B), insert gage (K)

and close filler cap (B).

Install engine shroud (page 9-31).

Install powerplant (page 5-14).

End of Task

6-83