TM 5-5420-202-20-2
ENGINE OIL FILLER CAP REPLACEMENT (Sheet 1 of 3)
TOOLS: 1/2 in. socket with 1/2 in. drive
Ratchet with 1/2 in. drive
SUPPLIES:
Gasket
Preformed Packings (2 required)
PRELIMINARY PROCEDURES:
Remove powerplant (page 5-2)
Remove engine shroud (page 9-30)
REMOVAL:
1.
Using socket, remove four screws and
washers (A) securing plate with electrical
connectors (B).
2.
Position plate with electrical connector
(B) aside.
Go on to Sheet 2
6-81