TM-5-5420-202-20-2
M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4
OCTOBER 1985
TM-5-5420-202-20-2 - Page 157 of 734
TM 5-5420-202-20-2
UPPER OIL FILLER TUBE REPLACEMENT (Sheet 1 of 4)
PROCEDURE INDEX
PROCEDURE
PAGE
Removal
Installation
6-84
6-86
TOOLS:
5/16 in. combination box and open end wrench
5 in. extension with 1/2 in. drive
Ratchet with 1/2 in. drive
1/2 in. socket with 1/2 in. drive
1/2 in. combination box and open end wrench
Putty knife
Flat-tip screwdriver
Vise
Hammer
SUPPLIES:
Packing
Drive screws (2 required)
PRELIMINARY PROCEDURE:
Remove powerplant (page 5-2).
REMOVAL:
1.
Using 1/2 inch wrench, 1/2 inch socket, and 5 inch extension,
remove two screws (A), and locknuts (B).
2.
Remove bracket (C).
Go on to Sheet 2
6-84
Back to Top
