TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 150 of 734

TM 5-5420-202 -20-2

ENGINE OIL FILTER ELEMENT REPLACEMENT (Sheet 2 of 5)

REMOVAL:

1.

Using 9/16 inch socket, remove screw (A) and sealing washer from

filter element cover (B). Discard sealing washer.

2.

Using wrench, turn valve (C) to

the left six full turns.

NOTE

Wait about five minutes before doing

steps 3 thru 7.

3.

Using 9/16 inch socket, remove

ten self-locking nuts and washers

(D).

4.

Install two 3/8-24UNF by 3-inch screws

in threaded holes (E).

Go on to Sheet 3

5.

Using 9/16 inch socket, tighten

screws in hole (E) and remove filter

cover (B).

6.

Remove gasket (F) and throw away gasket

(F).

6-77