TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 116 of 734

TM 5-5420-202-20-2

TRANSMISSION OIL COOLER REPLACEMENT (Sheet 6 of 10)

INSTALLATION:

CAUTION

Two persons are required to support oil cooler to keep it

from falling while doing steps 1 thru 3.

NOTE

Installation procedures are the same for the right and left

coolers except that the upper rear mount bolt on the right

cooler also secures support bracket (A).

3.

Using 3/4 inch wrench, tighten screws

and lockwashers (C).

4.

Position oil cooler screen into place on

an oil cooler.

5.

Start threads of two screws and lockwashers

(D) by hand to hold screen in place.

1.

Position oil cooler and oil cooler

screen mounting bracket (B) into

place on oil cooler frame.

2.

Start threads of four screws with

lockwashers (C) by hand to hold

oil cooler and oil cooler screen

mounting bracket in place.

Go on to Sheet 7

6-43