TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 273 of 734

TM 5-5420-202-20-2

FUEL RETURN LINES REPLACEMENT (Sheet 5 of 10)

19.

20.

21.

22.

23.

24.

25.

26.

27.

Using 1-1/8 inch wrench,

Using 1-1/8 inch wrench,

Remove washer (AE) and

disconnect fuel return tube (AC) from cross tube (V).

remove nut (AD) from cross tube (V).

cross tube (V) from bulkhead (AF).

Place cross tube (V) in vise and using 7/16 inch wrench, remove elbow (Y).

Remove cross tube (V) from vise.

Using screwdriver and 3/8 inch socket, remove screw (AG) and nut (AH) securing clamp

(AJ).

Remove clamp (AJ) from fuel return line (W).

Using 3/4 inch wrench on check valve (AK) and 7/8 inch wrench on fuel return line (W),

remove fuel return line (W) from check valve (AK).

Using 15/16 inch wrench on elbow (AL) and 3/4 inch wrench on check valve (AK), remove

check valve (AK) from elbow (AL).

CLEANING AND INSPECTION:

Inspect fuel return lines for deterioration, cracks, stripped threads, and clogging of lines.

Replace unserviceable parts as required.

Go on to Sheet 6

7-56