TM-5-5420-202-20-2
M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4
OCTOBER 1985
TM-5-5420-202-20-2 - Page 279 of 734
TM 5-5420-202-20-2
lNSPECT FUEL INJECTOR NOZZLES AND HOLDERS (Sheet 1 of 1)
REFERENCE: TM 5-5420-202-10
PRELIMINARY PROCEDURES:
Remove engine access cover
Remove engine access cover
Do not exceed 700 to 750 rpm and do not
than 10 minutes at a time. Before restarting,
1.
Start engine (TM 5-5420-202-10).
2.
3.
4.
(right bank) (page 6-107)
(left bank) (page 6-112)
run engine for more
allow engine to cool.
Place hand between cylinder heads (A) and top of holders (B) on each fuel injector. If
movement is felt, stop the engine (TM 5-5420-202-10) and notify support maintenance. If
movement is not felt, stop the engine and go to step 3.
Install engine access cover (left bank) (page 6-115).
Install engine access cover (right bank) (page 6-110).
7-62
Back to Top
