TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 283 of 734

TM 5-5420-202-20-2

AIR CLEANER INTAKE AND HOSE REPLACEMENT (Sheet 2 of 5)

1.

Using a 3/8 inch wrench, loosen clamp nut (A) at end of intake hose (B).

2.

Slide clamp (C) over intake hose (B) to middle of hose.

3.

Using a screwdriver, pry hose (B) from elbow (D), remove clamp (C).

4.

5.

6.

7.

8.

9.

10.

Close top grille doors and go inside crew

compartment.

Using a 1/2 inch socket, remove four screws

and lockwashers (E).

Remove cover and gasket (F).

Inspect gasket cemented to cover (F). If

damaged, use a putty knife to remove gasket.

Apply adhesive to new gasket and position

onto cover.

Using a 9/16 inch socket remove eight nuts

and lockwashers (G).

Remove air intake flange assembly (H) and

hose (B).

Inspect gasket (J) cemented to bulkhead.

If damaged, use a putty knife to remove

gasket. Apply adhesive to new gasket (J)

and Position on bulkhead.

Go on to Sheet 3

7-66