TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 284 of 734

TM 5-5420-202-20-2

AIR CLEANER INTAKE AND HOSE REPLACEMENT (Sheet 3 of 5)

11.

Using an extension, universal joint, and 9/16 inch

socket, remove six nuts and lockwashers (K).

12.

Using a 3/8 inch wrench, loosen clamp nut (L)

at end of intake hose (B), remove clamp (M).

13. Remove hose (B) from flange (N).

14.

Separate intake (P) and screen (Q) with gaskets (R) from flange (N).

15.

Clean and inspect screen and gaskets.

If screen is damaged or defective, replace.

16.

If one or both gaskets (R) are damaged, scrape gaskets (R) from screen (Q). Apply

adhesive to new gasket and position onto screen.

17.

Inspect and replace studs (S) in flange (N) as necessary.

Go

on to Sheet 4

7-67