TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

  TM-5-5420-202-20-2 - Page 412 of 734

TM 5-5420-202-20-2
HOSE ASSEMBLY (TO PURGE LINE) REPLACEMENT (Sheet 3 of 3)
INSTALLATION:
1.
Using two 5/8 inch wrenches, install bushings (A) and (B) in hose assembly (C).
2.
Using two 5/8 inch wrenches, install quick-disconnect (D) onto bushing (A).
3.
6.
Install clamp (H) and nut (J)
to engine.
7.
Using 5/8 inch wrench, install
bushing (F) to engine.
8.
Using 9/16 inch wrench, tighten
nut (J).
9.
Install engine upper access cover (page 17-
12).
4.
5.
Using 5/8 inch wrench on bushing (B)
and 1 inch wrench on coupler assembly
(E), install coupler assembly (E) onto
bushing (B).
Using 1 inch wrench on coupler assembly
(E) and 5/8 inch wrench on bushing (F),
install bushing (F) into coupler assembly
(E).
Position assembled hose assembly
(G) to engine.
End of Task
7-177


Back to Top