TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 417 of 734

TM 5-5420-202-20-2

FUEL TANK CONDENSATE REMOVAL (Sheet 5 of 6)

4.

Operate pump handle (E) several times

to drain any fuel left in hoses (D) and

(F) and hand fuel pump (G).

5.

Remove discharge hose (F) from 55

gallon drum (H), and let hose hang

over side of tank.

9.

10.

11.

6.

7.

8.

Install dust cover (M) on discharge con-

nector (L).

Using fingers in clamp rings (J), pull

clamps (K) out and up against dust

cover (M) to clamp dust cover in place.

Repeat steps 9 and 10 for installing

dust cover on hand fuel pump suction

connector and hoses.

Go on to Sheet 6

7-182

Using fingers in clamp rings (J), pull

clamps (K) out and down to loosen dis-

charge connector (L).

Remove discharge hose (E)

from pump discharge connector

(L).

Repeat steps 6 and 7 for removal of

suction hose.