TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 411 of 734

TM 5-5420-202-20-2

HOSE ASSEMBLY (TO PURGE LINE) REPLACEMENT (Sheet 2 of 3)

5.

6.

7.

8.

9.

Using 5/8 inch wrench on bushing (C)

and 1 inch wrench on coupler assembly

(E), remove bushing (C).

Using 1 inch wrench on coupler assembly

(E) and 5/8 inch wrench on bushing (D),

remove coupler (E).

Using two 5/8 inch wrenches, remove

bushing (D) from hose assembly (F).

Using two 5/8 inch wrenches, remove

quick-disconnect (G) from bushing (H).

Using two 5/8 inch wrenches, remove

bushing (H) from hose assembly (F).

CLEANING AND INSPECTION:

1.

Using rags, clean hose assembly (F), coupler assembly (E), and quick disconnect (G).

2.

Inspect hose assembly (F) and coupler assembly (E) for cracks and breaks. If damaged,

replace hose assembly (F) and coupler assembly (E).

Go on to Sheet 3

7-176