TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 432 of 734

TM 5-5420-202-20-2

FUEL-WATER SEPARATOR FILTER ELEMENT REPLACEMENT (Sheet 2 of 6)

REMOVAL:

NOTE

Use suitable container to catch

fuel spillage whenever any fuel

line or fitting is loosened or re-

moved. Use cloth to wipe any

spillage.

Discard cloth and

drained fuel in accordance with

local procedures.

NOTE

Clean cover and surrounding area to

make sure no dirt falls into fuel-

water separator.

1.

2*

3.

Using 7/16 inch wrench, remove eight

screws (A), lockwashers (B), and flat

washers (C).

Remove cover (D) from fuel-water

separator (E).

Remove preformed packing (F) from

cover (D). Throw away packing.

4.

5.

6.

Place container under fuel-water separator

(E) to catch fuel from fuel outlet line.

Using 7/8 inch wrench, disconnect fuel

outlet line (G) from elbow (H).

Using plastic barrier material and

1/2 inch masking tape, cover fuel

outlet line (G) to avoid getting dirt

into line.

Go on to Sheet 3

7-197