TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 591 of 734

FUEL TANK (LEFT) REPLACEMENT (Sheet 9 of 16)

INSTALLATION:

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

If required, use adhesive (Item 4, Appendix D

to install new seals (A) in marked

positions on hull.

Install upper front mount on fuel tank

(page 7-341).

Install upper rear mount on fuel tank

(page 7-396).

Apply sealing compound (Item 23, Appendix D

to male threads of fuel vent elbow (B),

and using adjustable wrench, install

and position elbow (B) in tank (C) as shown.

Install condensate outlet and plug in

fuel tank (page 7-178).

Install fuel level transmitter in fuel tank

(page 7-143).

Install emergency filler strainer, gasket

and cover (page 7-139).

Install fuel pump and capacitor housing

in fuel tank (page 7-16).

Install plug and bracket on top of fuel

tank and drain plug in the side of fuel

tank (page 7-152).

Install lower front mount on fuel tank

(page 7-383).

Install lower rear mount on fuel tank

(page 7-379).

CAUTION

Do not use pry bars or wood poles to

force fuel tank into place. Take

care not to scrape, puncture, or

otherwise damage tank.

12.

Using four persons, place fuel tank into the vehicle.

4-32

7-356

Change 5

TM 5-5420-202-20-2

Go on to Sheet 10

NOTE

If fuel tank is to be repaired, go to page 7-331. If fuel tank is to

be replaced,

got to step 2.