TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 1013 of 1060

TM 5-5420-202-20-3

FENDER SUPPORT NO. 4 (LEFT AND RIGHT) REPLACEMENT (Sheet 1 of 4)

PROCEDURE INDEX

PROCEDURE

PAGE

16-5 4

Removal

Cleaning and Inspection

16-56

Installation

16-56

TOOLS: Ratchet with 1/2 in. drive

1 in. socket with 1/2 in. drive

1-1/8 in. socket with 1/2 in. drive

Hinged handle with 1/2 in. drive

7/8 in. socket with 1/2 in. drive

9/16 in. socket with 1/2 in. drive

3/4 in.socket with 1/2 in. drive

3/4 in. combination box and open end wrench

Torque wrench with 1/2 in. drive (0-175 lb-ft)

5/8 in. socket with 1/2 in. drive

7/8 in. combination box and open end wrench

SUPPLIES:

Lockwashers (4 required)

Locking compound (Item 15, Appendix D)

PRELIMINARY PROCEDURES:

Remove rear fender stowage box (page 16-84)

Remove fender extension (page 16-65)

Remove air cleaner (page 7-90)

Left No. 4 fender support is shown; right No. 4 fender support replacement is

similar.

1.

Using 5/8 inch socket, remove screw (A) and flat washer (B) holding extension bracket (C)

to bottom flange of No. 4 fender support (D).

Go on to Sheet 2

TA249727

16-54