TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 1015 of 1060

TM 5-5420-202-20-3

FENDER SUPPORT NO. 4 (LEFT AND RIGHT) REPLACEMENT (Sheet 3 of 4)

CLEANING AND INSPECTION:

1.

Inspect extension bracket for damage and

cracks, Replace if defective.

2.

Inspect threaded holes and studs for thread

damage. Replace or repair if defective.

INSTALLATION:

1.

Using 1-inch socket and hinged handle, install

fender support (A) to hull support (E) and

secure with four screws (C) and lockwashers (D).

Using torque wrench and 1-1/8 inch socket,

tighten screws (C) to 125-130 lb-ft (169-176 N-m).

Go on to Sheet 4

16-56

Using 3/4 inch socket and 7/8 inch wrench,

secure top flange of support (A) to top of

hull support with two screws (E) and nuts (F).

TA249729