TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 1009 of 1060

TM 5-5420-202-20-3

FENDER SUPPORT NO. 3 (LEFT AND RIGHT) REPLACEMENT (Sheet 1 of 4)

PROCEDURE INDEX

PROCEDURE

PAGE

Removal

Cleaning and Inspection

16-50

16-52

Installation

16-52

TOOLS: 5/8 in. socket with 1/2 in. drive

3/4 in. socket with 1/2 in. drive

7/8 in. combination box and open end wrench

1 in. socket with 1/2 in. drive

Ratchet with 1/2 in. drive

Hinged handle with 1/2 in. drive

Torque wrench with 1/2 in. drive (0-175 lb-ft)

SUPPLIES:

Lockwashers (4 required)

Locking compound (Item 15,

Appendix D)

Locknut

PRELIMINARY PROCEDURES:

Remove fender extension (page 16-65)

Remove air cleaner (page 7-90)

Remove front fender center stowage box (page 16-76)

REMOVAL:

NOTE

Left No. 3 fender support is shown, right No. 3 fender support replacement

is similar.

1.

Using 5/8 inch socket, remove screw (A) and flat washer (B) holding extension mounting

bracket (C) to bottom flange of No. 3 fender support (D).

Go on to Sheet 2

TA249723

16-50