TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 1031 of 1060

TM 5-5420-202-20-3

FENDER AND SHIELD (REAR) REPLACEMENT (Sheet 4 of 7)

8.

Using 7/16 inch socket on screw (W) and 7/16 inch wrench on nut (X), remove nine screws

(W), washers (Y), and nuts (X) holding anti-squeak (Z) to shield (V). Remove anti-squeak (Z)

from shield (W).

9.

Using 7/16 inch socket on screw (AA) and

7/16 inch wrench on nut (AB), remove three

screws (AA), washers (AC), lockwashers (AD),

and nuts (AB), holding anti-squeak (AE) to

shield (V). Remove anti-squeak (AE) from

shield (V).

INSTALLATION:

1.

2.

3.

4.

Install anti-squeak (A) to shield (B) using three

screws (C), washers (D), lockwashers (E) and nuts

(F).

Using 7/16 inch socket and 7/16 inch wrench,

tighten three screws (C) and nuts (F).

Install anti-squeak (G) to shield (B) using nine

screws (H), washers (J), and locknuts (K).

Using 7/16 inch socket and 7/16 inch wrench,

tighten screws (H) and locknuts (K).

Go on to Sheet 5

16-72

TA249745