TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 1039 of 1060

TM 5-5420-202-20-3

FRONT FENDER (CENTER LEFT AND RIGHT) STOWAGE BOX COVER

PROCEDURE INDEX

PROCEDURE

REPAIR (Sheet 1 of 4)

PAGE

Disassembly

16-80

Cleaning and Inspection

Assembly

16-82

TOOLS: 9/16 in. combination box and open end wrench

Long round nose pliers

Putty knife

Blacksmith’s anvil

Electric drill and drill set

2 lb. hammer

Punch (drive pin 1/8 inch diameter point)

Center punch

SUPPLIES: Adhesive (Item 2, Appendix D)

Pads (3 required)

Rivets (18 required)

Cotter pin

Lockwasher (12 required)

Washer, shim (as required)

S-chain hook

PRELIMINARY PROCEDURE:

Remove stowage box from vehicle (page 16-76)

DISASSEMBLY:

NOTE

Repair of right and left stowage

box covers is the same.

1.

Using pliers, remove S-hook (A) from lock.

2.

Using pliers, remove cotter pin (B) from

latch assembly.

16-82

3.

Using wrench, remove nut (C), flat washer

(D), and tongue (E) from handle (F).

4.

Remove handle (F) from lock (G).

Go on to Sheet 2

16-80

TA249753