TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 1047 of 1060

TM 5-5420-202-20-3

REAR FENDER (LEFT AND RIGHT) STOWAGE BOX COVER REPAIR (Sheet 1 of 4)

PROCEDURE INDEX

PROCEDURE

PAGE

Disassembly

16-88

Cleaning and Inspection

16-89

Assembly

16-90

TOOLS: 11/16 in. combination box and open end wrench

Long round nose pliers

Putty knife

Blacksmith’s anvil

9/16 in. combination box and open end wrench

2 lb. hammer

Punch (drive pin 1/8-inch diameter point)

Electric drill and drill set

SUPPLIES:

Adhesive (Item 2, Appendix D)

Cotter pin

Rivets

Lockwasher (8 required)

Pads (2 required)

Washer, shims (as required)

PRELIMINARY

PROCEDURE:

Remove stowage box from vehicle

(page 16-84)

DISASSEMBLY:

NOTE

Repair of both left and right

covers is identical.

1.

Using pliers, remove cotter pin (A) from handle

(B).

2.

Using 11/16 inch wrench, remove nut (C),

washer (D) and tongue (E) from handle (B).

3.

Remove handle (B) from stowage box cover (F).

Go on to Sheet 2

16-88