TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 138 of 1060

TM 5-5420-202-20-3

MASTER CONTROL PANEL REPAIR (Sheet 64 of 73)

Master Control Panel Wiring Harness Replacement (Sheet 1 of 7)

PROCEDURE INDEX

PROCEDURE

PAGE

Removal

10-101

Installation

10-105

TOOL:

3/8 in. combination box and open end wrench

Offset cross-tip screwdriver

Flat-tip screwdriver

3/8 in. socket with 1/2 in. drive

Ratchet with 1/2 in. drive

11/32 in. open end wrench

SUPPLIES: Silicone compound

PRELIMINARY PROCEDURE:

Using flat-tip screwdriver

(Item 32, Appendix D)

Remove panel from vehicle

(page 10-34).

on screws (A)

2.

3.

4.

and wrench on nuts (B), remove four

screws (A), lockwashers (C), and nuts

(B) securing connector (D) to panel

(E).

Remove connector (D) from panel (E) and

position aside.

Using flat-tip screwdriver on screws (F)

and wrench on nuts (H), remove four

screws (F), lockwashers (G), and nuts

(H) securing connector (J) to panel

(E).

Remove connector (J) from panel(E) and

position aside.

Go on to Sheet 2

TA249042

10-101