TM 5-5420-202-20-3
MASTER CONTROL PANEL REPAIR (Sheet 71 of 73)
Gas Particulate And Bilge Pump Lead Assembly Replacement (Sheet 1 of 1)
SUPPLIES: Silicone compound (Item 32, Appendix D)
PRELIMINARY PROCEDURE: Remove panel from vehicle (page 10-34).
REMOVAL:
1.
Remove connector from bilge pump and gas particulate circuit breaker (A).
2.
Remove connector from bilge pump
switch (E).
3.
Remove connector from Gas par
switch (C).
4.
Remove lead assembly (D) from
INSTALLATION:
1.
2.
3.
4.
5.
Apply silicone compound to three
connectors on cable (D).
Connect connector to bilge pump and
gas particulate circuit breaker (A).
Connect connector to bilge pump switch
(B).
Connect connector to gas particulate
switch (C).
Install panel in vehicle (page 10-36).
End of Task
TA249049
10-108