TM 5-5420-202-20-3
MASTER CONTROL PANEL REPAIR (Sheet 67 of 73)
Master Control Panel Wiring Harness Replacement (Sheet 4 of 7)
15.
Using socket, remove two nuts (V), flatwashers (W), and lockwashers (X) securing two
harness junctions (Y) to panel.
16.
Remove wiring harness (Z).
17.
Inspect studs (AA) or stripped or damaged threads.
If any defects are found, replace.
18.
If necessary to replace stud (AA), use offset cross-tip screwdriver on screw (AC) and
3/8 inch wrench on stud (AA) and replace stud (AA), washer (AB), and/or screw (AC).
Go on to Sheet 5
10-104
TA249045