TM 5-5420-202-20-3
INSTRUMENT PANEL CLUSTER ASSEMBLY REPAIR (Sheet 21 of 23)
Instrument Panel Wiring Harness Replacement (Sheet 3 of 4)
10. Disconnect two leads (circuit 40) from two
panel lights (M).
11. Loosen receptacle connector retainer nut
(N) (hidden) and slide back on leads.
12. Remove wiring harness from panel.
INSTALLATION:
1.
2.
3.
4.
5.
Apply silicone compound to 16 lead
connectors of instrument panel wiring
harness.
Place wiring harness in position in panel.
Using fingers, tighten receptacle connec-
tor retainer nut (A) (hidden) to
receptacle connector (B).
Using screwdriver, install four screws and
lockwashers (C) securing receptacle con-
nector (B) to panel.
Using wrench, install nut and lockwasher
(D) securing harness junction (E) to panel.
Go on to Sheet 4
10-134
TA249075