TM 5-5420-202-20-3
INTERCONNECTING BOX ASSEMBLY REPLACEMENT (Sheet 1 of 1)
TOOLS:
1 in. combination box and open end wrench
7/16 in. socket with 1/2 in. drive
Ratchet with 1/2 in. drive
Spanner wrench
SUPPLIES:
Lockwashers (2 required)
REMOVAL:
1.
2.
3.
4.
Using spanner wrench, remove two electrical
connectors (A) from box assembly (B).
Using 1 inch wrench, remove electrical
connector (C) from box assembly (B).
Using socket, remove two screws (D)
and lockwashers (E), securing box assembly
(B) to floor.
Remove box assembly (B).
INSTALLATION:
1.
Place box assembly (B) in position on floor.
2.
Using socket, install two screws (D) and lockwashers (E)
(B) to floor.
3.
Using 1 inch wrench, install electrical connector (C) on
4. Using spanner wrench, install two electrical connectors
(A) on box assembly (B).
securing box assembly
box assembly (B).
End of Task
TA249084
10-143