TM 5-5420-202-20-3
INTERCONNECTING BOX ASSEMBLY REPAIR (Sheet 2 of 8)
5.
Holding nuts (H) with 11/32 inch wrench, use
screwdriver to remove four screws (J),
lockwashers (K), and nuts (H).
6.
7.
Remove receptacle
gasket (L) from box
Remove flat washer
assembly (E).
assembly
assembly
(M) from
(E) and
(C).
receptacle
8.
Using 7/16 inch wrench, remove nut (N) from receptacle assembly (P).
9. Remove two lockwashers (Q), electrical terminal (R), and bus bar (S) from
receptacle assembly (P).
10. Holding nuts (T) with 5/16 inch wrench, use screwdriver to remove four screws
(U), lockwashers (V), and nuts (T).
11. Remove receptacle assembly (P) from box assembly (C).
Go on to Sheet 3
TA249086
10-145