TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 176 of 1060

TM 5-5420-202-20-3

MASTER RELAY ASSEMBLY REPLACEMENT (Sheet 2 of 3)

2.

3.

4.

5.

Using 7/8 inch wrench on electrical connector (C)

and adjustable wrench on protection device (D),

remove electrical connector (C) from protection device (D).

Using two 1/2 inch wrenches, remove

two screws (E), four lockwashers (F),

and two nuts (G) securing master relay

(B) to mounting bracket (H).

Remove master relay (B) from mounting

bracket (H).

Using 7/8 inch wrench, remove

protection device (D) from

master relay (B).

INSTALLATION:

1. Using 7/8 inch wrench, install

protection device (A) to master

relay (B).

2.

Position master relay (B) on mounting

bracket (C).

3.

Using two 1/2 inch wrenches, install two

screws (D), four lockwashers (E), and

two nuts (F).

Go on to Sheet 3

TA249080

10-139