TM-5-5420-202-20-3
M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4
OCTOBER 1985
TM-5-5420-202-20-3 - Page 196 of 1060
TM 5-5420-202-20-3
FIRE EXTINGUISHER SOLENOID RELAY REPLACEMENT (Sheet 2 of 2)
2.
Using screwdriver, remove four screws (C) and lockwashers (D) securing fire extinguisher
solenoid relay (B) to mounting plate.
3.
Remove fire extinguisher solenoid relay (B) from vehicle.
INSTALLATION:
1.
Position fire extinguisher solenoid relay (B) on mounting plate
2.
Using screwdriver, install four screws
(C) and lockwashers (D) securing fire
extinguisher solenoid relay (B) to
mounting plate.
3.
Using wrench, connect electrical
connector (A) to fire extinguisher
solenoid relay (B).
4.
Install access plate to floor
at commander’s station (page 17-9).
5. Check operation of fire extinguisher solenoid (TM 5-5420-202-10).
End of Task
TA249100
10-159
Back to Top
