TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 243 of 1060

TM 5-5420-202-20-3

LEFT TAILLIGHT

TOOLS: 9/16 in.

– STOPLIGHT ASSEMBLY REPLACEMENT (Sheet 1 of 3)

combination box and open end wrench

SUPPLIES:

Silicone compound (Item 32, Appendix D)

1/2 in. masking tape (Item 58, Appendix D)

Lockwashers (2 required)

REFERENCE:

TM 5-5420-202-10

PRELIMINARY PROCEDURES:

Remove transmission shroud (page 9-2)

Inspect leads

1.

2.

3.

NOTE

(A) and leads (B) for

numbered tags (C). If leads do not

have tags, use masking tape and pen-

cil to number leads 21, 22, and 24.

Reach through exhaust door opening and using fingers

disconnect three leads (A) from hull con-

nectors (B).

Slide three connector shells (D) back on

taillight leads to expose three slotted

washers (E).

NOTE

Silicone compound may

on leads (A) to remove

be needed

shells (D).

Remove three slotted washers (E) and three

shells (D).

Go on to Sheet 2

TA249145

10-204