TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 248 of 1060

TM 5-5420-202-20-3

LEFT TAILLIGHT - STOPLIGHT ASSEMBLY REPAIR (Sheet 3 of 3)

ASSEMBLY:

1.

2.

3.

4.

Insert three leads (A) through body assembly (B).

Install socket and wiring assembly (C) by pressing in grommet (D).

Using cross-tip screwdriver, install three screws (E).

Using cross-tip screwdriver, install two screws (F) and lockwashers (G).

5.

Install three lamps (H) and (J).

6.

Coat preformed packing gasket (K) with silicone compound

before installation.

7.

Place new preformed packing (K) on door assembly (L).

NOTE

Wires are located at the bottom

of housing (B) for positioning

of door assembly (L).

8. Using flat-tip screwdriver, install six screws (M), door

assembly (L), and six retainer rings (N) on body assembly (B).

9. Install lamp assembly (page 10-205).

10. Check taillight for operation (TM 5-5420-202-10).

End of Task

TA249150

10-209