TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 256 of 1060

TM 5-5420-202-20-3

HEADLIGHT ADJUSTMENT (Sheet 1 of 2)

TOOLS: 7/16 in. combination box and open end wrench

9/16 in. combination box and open end wrench

50 ft measuring tape

SUPPLIES:

Chalk (Item 11, Appendix D)

REFERENCE: TM 5-5420-202-10

PRELIMINARY PROCEDURES:

ADJUSTMENT:

1.

2.

3.

4.

5.

6.

7.

8.

Park vehicle on flat ground 25 ft from flat vertical

wall

Using measuring tape, locate center of vehicle.

Using chalk, draw line (A) on ground and up

vertical wall (B).

Using measuring tape, measure distance from

ground to center of headlight.

Using chalk, draw line (C) on wall (B) of the

distance found in step 3.

Using measuring tape, measure down 27-1/4 inches

from line (C). Using chalk, draw line (D) on

wall (B).

Using measuring tape, measure distance from

center of vehicle to center of clear lens on left

headlight.

Using chalk, draw line (E) that distance found in

step 6 on wall (B).

Perform steps 6 and 7 for right side.

Using

chalk, draw line (F) on wall (B).

Go to Sheet 2

TA249158

10-217