TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 259 of 1060

TM 5-5420-202-20-3

ENGINE OIL HIGH TEMPERATURE

THERMOSTATIC SWITCH REPLACEMENT (Sheet 2 of 2)

REMOVAL :

1. Place rags under switch.

2. Pull socket or rubber insulated connector (A) from switch cap (B).

3. Using socket,

remove switch (C) from engine.

1.

5.

6.

7.

8.

Using sealing compound, lightly coat

threads of new switch.

3.

4.

Using socket, install new switch

(A) into engine.

Push socket of rubber insulated connector (B) into

switch cap (C).

Remove rags from under switch.

Connect engine for powerplant ground hop (page 5-26).

Start and run

engine.

Observe temperature indicator for normal oil temperature

(TM

5-5420-202-10).

Shut down engine. Disconnect engine from powerplant ground hop (page 5-40).

Install powerplant

(page

5-14).

End of Task

TA249161

10-220