TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 255 of 1060

TM 5-5420-202-20-3

TAILLIGHT GROMMET REPLACEMENT (Sheet 1 of 1)

TOOLS: Flat-tip screwdriver

Sandpaper

Hand hacksaw

SUPPLIES: Silicone compound (Item 32, Appendix D)

Grommet

PRELIMINARY PROCEDURES:

Remove transmission shroud (page 9-2)

Remove tailight from vehicle (page 10-210)

(Right) on page 10-204 (Left)

1.

Using hacksaw, cut inside end from grommet.

2.

Using screwdriver, pry out grommet and throw

grommet away.

3.

Using sandpaper, clean out grommet cavity.

INSTALLATION:

1.

Apply silicone compound to new grommet.

2.

Install new grommet by pushing in until sealed.

3.

Install taillight in vehicle (page 10-212) (Right) or

page 10-206 (Left).

4.

Install transmission shroud (page 9-6).

End of Task

TA249157

10-216