TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 249 of 1060

TM 5-5420-202-20-3

RIGHT TAILLIGHT - STOPLIGHT ASSEMBLY REPLACEMENT (Sheet 1 of 3)

TOOLS:

9/16 in. combination box and open end wrench

SUPPLIES:

Silicone compound (Item 32, Appendix D)

1/2 in. masking tape (Item 58, Appendix D)

Pencil (Item 71, Appendix D)

Lockwashers (2 required)

PRELIMINARY PROCEDURES:

Remove transmission shroud (page 9-2)

REMOVAL:

1.

2.

3.

NOTE

Inspect leads (A) and leads (B) for

numbered tags (C) 23 and 24. If

leads do not have tags, use masking

tape and pencil to number leads.

Reach through exhaust door opening and

using fingers disconnect two leads

(A) from hull connectors (B).

Slide two connector shells (D) back on

taillight leads to expose two slotted

washers (E).

NOTE

Lubricant may be needed on leads

(A) to remove shells (D).

Remove two slotted washers (E) and two

shells (D).

Go on to Sheet 2

10-210