TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 254 of 1060

TM 5-5420-202-20-3

RIGHT TAILLIGHT - STOPLIGHT ASSEMBLY REPAIR (Sheet 3 of 3)

ASSEMBLY:

1.

2.

3.

4.

Insert two leads (A) through body assembly (B).

Install socket and wiring assembly (C) by pressing in grommet (D).

Using cross-tip screwdriver, install three screws (E).

Using cross-tip screwdriver, install two screws (F) and two lockwashers (G).

5.

6.

Install two lamps (H).

Coat preformed packing gasket (J) with silicone compount before installation.

7.

8.

9.

10. Check taillight for operation (TM 5-5420-202-10).

End of Task

TA249156

Place preformed packing (J) in door assembly (K).

NOTE

Wires are located at the bottom of body assembly (B) for

positioning of door assembly (K) as shown.

Using flat-tip screwdriver, install six screws (L), door

assembly (K), and six retainer rings (M).

Install lamp assembly (page 10-211).

10-215