TM 5-5420-202-20-3
RIGHT TAILLIGHT - STOPLIGHT ASSEMBLY REPAIR (Sheet 2 of 3)
3. Remove two stoplight and taillight lamps (E).
4. Using cross-tip screwdriver, remove two screws (F) and two lockwashers (G).
5.
6.
Using cross-tip screwdriver, remove three screws (H) from grommet
Remove socket and wiring assembly (K) with fingers by pressing out
.
assembly (L).
CLEANING AND INSPECTION:
(J).
grommet (J) from body
1. Inspect taillight assembly for corrosion.
Corroded areas whcih cannot be cleaned with
crocus cloth or steel wool are cause for replacement of that item.
2. Inspect taillight and components for cracks. If any items are cracked, replace.
3. Inspect for mechanical damage and wear. If damaged or worn, replace.
Go on to Sheet 3
10-214