TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 267 of 1060

TM 5-5420-202-20-3

STARTER LOW VOLTAGE RELAY SOLENOID REPLACEMENT (Sheet 2 of 2)

INSTALLATION:

1.

NOTE

Be sure insulator (E) are placed between

relay solenoid (A) and engine mounting

bracket (B) as shown.

Place relay solenoid (A) in position over

mounting bracket (B) with the electrical

plug (C) facing front.

Using socket, extension,

and wrench, secure solenoid (A)

to mounting plate (B) with two screws

(D), insulator (E), and self-locking

nuts (F).

Screw electrical connectors (G) to electrical

plug (C). Tighten, using spanner wrench.

TEST:

1.

2.

3.

4.

Connect powerplant for ground hop

(page 5-26).

Start engine (TM 5-5420-202-10). Check to

be sure engine starts smoothly.

Stop engine. Disconnect powerplant from

powerplant ground hop (page 5-40).

Install powerplant (page 5-14).

End of Task

TA249169

10-228