TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 265 of 1060

TM 5-5420-202-20-3

ENGINE OIL TEMPERATURE TRANSMITTER REPLACEMENT (Sheet 3 of 3)

2. Using 15/16 inch wrench, install, new

transmitter (A) into engine.

3. Push socket of rubber insulated connector (B) into

transmitter cap (C).

4. Remove rags from under transmitter.

5. Using 1/2 inch wrench, install self-locking

nut and clamp (D).

6. Connect engine for powerplant ground hop

(page 5-26).

7. Start and run engine. Observe oil temperature

8.

9.

indicator for normal oil temperature.

Shut down engine. Disconnect engine from powerplant ground hop (page 5-40).

Install powerplant (page 5-14).

End of Task

TA249167

10-226