TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 266 of 1060

TM 5-5420-202-20-3

STARTER LOW VOLTAGE RELAY SOLENOID REPLACEMENT (Sheet 1 of 2)

TOOLS: Ratchet with 1/2 in. drive

5 in. extension with 1/2 in. drive

7/16 in socket with 1/2 in. drive

7/16 in. combination box

and open end wrench

Spaner wrench

SPECIAL TOOLS:

Ground hop kit

(Item 31, Chapter 3, Section I)

REFERENCES: TM 5-5420-202-10

PRELIMINARY PROCEDURES:

Remove powerplant (page 5-2)

REMOVAL:

1. Using spanner wrench unscrew electrical

plug (A) from front of relay solenoid (B).

2. Using socket, extension, and wrench, remove

two screws (C), insulators (D), and self-

locking nuts (E) securing relay solenoid

(B) to mounting bracket (F). Remove

relay solenoid.

INSPECTION:

Inspect insulator (D) and wiring harness (G) with

conector plug (A) for cracks or damage.

Replace if damaged.

Go on to Sheet 2

10-227