TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

  TM-5-5420-202-20-3 - Page 431 of 1060

FRONT ACCESSORY HARNESS REPLACEMENT (Sheet 5 of 14)
15.
16.
Using 7/16 inch socket, remove screw
(AD), lockwasher (AE), and flat washer
(AF) from one end of two straps (AG).
Using 5/8 inch wrench, remove
nut (AH) and disconnect lead (AJ)
from center battery terminal.
17.
18.
Follow wiring harness assembly (D)
to three straps (AK) between right
battery holding bracket and right
headlight (AL).
Using 7/16 inch socket, remove three screws (AM), lockwashers (AN), flat washers
(AP), and straps (AK).
19.
Remove five connectors (AQ) from clips on bracket (AR) below right headlight (AL).
20.
Disconnect five connectors (AQ) from leads to right headlight (AL).
21.
Disconnect one connector (AQ) from dummy load.
Go on to Sheet 6
10-296.92
Change 7
TM 5-5420-202-20-3


Back to Top