TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 429 of 1060

FRONT ACCESSORY HARNESS REPLACEMENT (Sheet 2 of 14)

2.

3.

4.

5.

6.

Follow wire harness (D) to

two cushion clamps (E)

securing harness to ver-

tical post (F) located to

left and forward of driver’s

seat.

Using 7/16 inch socket, remove

screws (G), lockwashers (H) and

clamps (E).

Using spanner wrench,

loosen spanner nut (J) at

dimmer switch connector (K).

Disconnect connector (K).

Follow harness assembly

(D) to left front of

vehicle to three clamps

(L), located along bottom

of battery holding bracket.

Using 7/16 inch socket,

remove screws (M), lock-

washers (N), and clamps (L).

Go on to Sheet 3

Change 7

10-296.89

TM 5-5420-202-20-3