TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 501 of 1060

TM 5-5420-202-20-3

SHIFTING CONTROL AND RELATED PARTS REPAIR AND REPLACEMENT (Sheet 3 of 14)

4.

Using 9/16 inch wrench, remove bolt

(F) securing link (G) to rod (H). Let

5.

6.

7.

rod (H) drop below floor.

Using socket and extension, remove four

screws (J), lockwashers (K), and flat

washers (L) from bracket assembly (M).

Using socket and extension, tighten screws

installed in steps 3, 4, and 5, alternately.

Using socket and extension, remove three

screws (P), lockwashers (Q), and flat

washers (R) from base assembly (S).

Go on to Sheet 4

8.

Remove base assembly (S) and bracket

assembly (M) as a single unit from vehicle.

9.

Using pencil and masking tape, tag all

shims (T) found under bases (S) and (M).

TA249271

11-4